Strip C’Lip Stock Oilers

These miniature Stock Oilers are designed to lubricate light gauge and narrow materials, from small diameter wire to 4-inch wide coil material. There are two different styles.

The “VC” style is for vertivcal applications, such as some spring-forming operations, and for four-slide operations. The “HVC” style is for horizontal applications, such as found in conventional punch press work. The “HVC” can be used in either the vertical or the horizontal applications.

VC Style

HVC Style

VC Style and HVC Style Stock Oilers shown connected to the end of the optional Positioning Arm Adapter Bar (an accessory that attaches to the optional floor stand). The lubricant feed tubes are connected to the Reservoir (not shown).

STRIP C’LIP* STOCK OILERS

HORIZONTAL
OR VERTICAL

VERTICAL
ONLY

ONE GALLON RESERVOIRS

SCR 1
RESERVOIR

On/Off knob

Flow-rate Valve

Sight Glass

8-Port aluminum Distribution Block

SCR 1E
RESERVOIR

Translucent
Reservoir

Steel Support Pan

8 connections in Bottom

POSITIONING ARM SETS

Positioning Arm Sets (as shown in all four pictures on this page) are available to attach to the Stand if the operator needs to stabalize the Strip C’Lip Stock Oiler. Many times, the Stock Oiler can ride up against the die or the feeder.

STRIP C’LIP*

All Strip C’Lip* Stock Oilers are 5/8-inch wide to fit in narrow spaces.