Type “A” Stock Oilers

LOW-COST PORTABLE STOCK OILERS

BEARING BOSS* End Plates DRIP DIRECTOR* Drip Tubes

A-9 Stock Oiler

For material widths from 1/2-inch to 8 inches

A-18 Stock Oiler

For material widths from 8 inches to 17 inches

Top roll is fed by lubricant dripping from perforated tube. Bottom roll picks up lubricant from pan. Rolls turn on free-wheeling steel axle rod insuring even spread of lubricant. Constant spring pressure on rolls assures smooth, uniform lubrication. Reservoir capacity is 1 quart. An optional larger Reservoir is available.

Stock Oilers are inclinable with press. OILER DIMENSIONS: (width) x  (length) x (height):     A-9 – 4 1/2″ x 10 1/2″ x 13 3/4″ and A-18 – 4 1/2″ x 19 1/2″ x 13 3/4″ Feed-line height from bottom of pan to center of rolls is 2 3/4″ Optional FLOOR STANDS available for Type “A” Stock Oilers. Feed-line height is adjustable from 24 inches to 42 inches. Heavy 14-lb. base plate is large enough to sit a 5-gallon pail on, for extra weight in extreme situations.

Covered with heavier commercial quality carpet. For use with oils, water soluble oils and low ph (non-alkaline) lubricants. and the smooth vinyl section to say: Smooth 1/4″ thick solid vinyl, for applications where a VERY thin coating of lubricant is required. For use with vanishing oils or solvent based lubricants.